3M™ Body Gard Textured Coating, Protective Coating, Grey, 1 kg, 08874
- Part Number 08874
- 3M ID 7100241051
- UPC 04054596861800
Details
Highlights
- Excellent stone-chip resistance
- Overpaint in 30 minutes
- Coating becomes tack free in 10-15 minutes
- Can be painted with air drying and low bake paints after two hours at normal temperatures The application of a primer is recommended
- Use with HGP system to achieve a variation of textures from one gun
Reproduce automotive manufacturers’ stone chip finishes with 3M™ Body Gard Textured Coating. Our rubber based coating has excellent stone chip resistance and is available in black, white and grey. To get medium to heavy textures, just change the application method.
This rubber based coating was developed to enable most manufacturers’ stone chip finishes to be reproduced in the bodyshop. Black, white and grey coatings are available for application to any part of the car requiring stone chip protection. Medium to heavy textures can be obtained depending on the application method used.
Typical Properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
