1. Ireland
  2. All 3M Products
  3. Abrasives
  4. Abrasive Discs
  5. Film Discs
  6. 3M™ Trizact™ Finesse-it™ Film Disc Roll 268XA, 1 3/8 in x NH A20, 1000 discs per roll 4 rolls per case

3M™ Trizact™ Finesse-it™ Film Disc Roll 268XA, 1 3/8 in x NH A20, 1000 discs per roll 4 rolls per case

3M ID 7100081706UPC 00051125871082
  • 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
  • Creates high gloss level for glass defect repair and solid surface finishing
  • Micron sized abrasive pyramids produce a high-gloss finish
  • Use on mini random orbital sanders to produce a polish-ready finish
 More
View all details
Specifications
Attachment Type
PSA
Backing Material
Film
Brand
Trizact™
Coat Type
Closed Coat
Equipment - Machines
Random Orbital Sanders
Industries
AOEM, General Industry, Paint Preparation
Max RPM
10000
Micron Grade
A20
Product Form
Disc
Substrates
Paint, Plastic
Product Details
  • 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
  • Creates high gloss level for glass defect repair and solid surface finishing
  • Micron sized abrasive pyramids produce a high-gloss finish
  • Use on mini random orbital sanders to produce a polish-ready finish
  • Get finer finishes compared to paper and film-backed abrasives

For glass defect repair, corian and acrylic solid surface finishing. Precisely shaped pyramids wear away continually exposing fresh abrasive. Few processing steps, higher gloss level, effective surface leveling. Little water, easy touchup.

Use 3M™ Trizact™ Hookit™ Film Disc 268XA on a variety of solid surfaces, topcoats, and to allow most finish and process requirements. Our 268XA discs get results faster, last longer and produce a finer finish, compared to conventional abrasive products. 3M microreplication technology makes the discs last longer. Three-dimensional, pyramid structures are uniformly distributed over the entire surface to ensure consistent performance and eliminate disc-to-disc variation. The microreplication technology provides precise finish control and can reduce grade sequences so fewer process steps and abrasive products are needed. Aluminium oxide abrasive mineral is coated on the film backing of our discs. It’s tough and durable, with a high cut-rate and low heat retention. The mineral self-fractures to expose fresh cutting edges when in use – unlike traditional abrasives, such as garnet that quickly wear down with use. It’s suitable for a wide variety of substrates in woodwork and metalwork, including ferrous alloys. Our discs are made with 3M™ Hookit™ attachment system. Hookit secures a disc in place and allows for quick mounting to and removal from a hook-and-loop backup disc pad* used on rotary or random orbital tools. Hookit allows the discs to be reused for the duration of their life. *Sold separately

Suggested Applications

  • Use for solid surfaces, topcoats and to allow most finish and process requirements