3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015, White, Config roll
- 3M ID 7100013180
Details
Highlights
- White, flexo plate mounting tape with air release feature adhesive
- 0.38 mm thickness
- Standard density
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
- Easy mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve, and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Plate easily demounts from the double coated cushioned tape without adhesive residue
- Tape also removes cleanly from the sleeve or steel print cylinder
- Flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
Mount your photopolimeric plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015. Our 0.38 mm white, double coated foam tape has the air release feature with easy plate side removal. It is used for combination jobs.
E-Series features differential acrylate adhesive system on each side of a foam carrier, protected by a release liner on one side
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015 is a white foam tape that provides high quality combination print. This is the standard tape for combination print. It has the air release feature that allows for bubble free mounting. This flexographic plate mounting tape has excellent resistance to lifting on press allowing for easy and clean plate removal.
Recommended Applications
- Mounting photopolymer plates to flexographic printing cylinders and sleeves
- Used in combination, process and solid printing processes
- 3M sticky back tapes are designed for narrow web presses to print tag and labels
3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs.
This cushion tape is manufactured for 15 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.
Learn About and Compare More 3M Flexographic Plate Mounting Systems (PDF, 5.00 Mb)
On Easy with Reduced Air Entrapment
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.
Typical Properties
Resources
Connect with us. We’re here to help.
Need help finding the right product for your project? Contact us if you need product, technical or application advice or want to collaborate with a 3M technical specialist
Send Us a Message
Thank you for your interest in 3M. In order to help us manage and respond to your query effectively, we politely ask you to provide some key information, including your contact details. The information you provide will be used to respond to your request through email or telephone by a 3M representative or one of our authorised business partners with whom we might share your personal information consistent with the 3M privacy policy
Thank you for your contacting 3M
We have received your message and are now looking into your enquiry
One of our representatives will get in touch with you by phone or email
An error occurred.
Related Products
| Adhesive Type | Differential Acrylate | |||
| Air Release | Yes | |||
| Application Thickness (Metric) | 0.4 mm | |||
| Applications | Flexographic Plate Mounting | |||
| Backing Material | Polyethylene Foam | |||
| Brands | Cushion-Mount™ | |||
| Composite Sleeves | Yes | |||
| Primary Liner | Polycoated Polyester | |||
| Primary Liner Thickness (Metric) | 0.11 mm | |||
| Print Quality | Combination Printing - Standard | |||
| Print Quality (Series) | 10 Series | |||
| Product Color | White | |||
| Product Form | Roll | |||
| Total Tape Thickness without Liner (metric) | 0.432 mm | |||
| Urethane Sleeves | Yes | |||
| eClass 14 Classification Group | 41090702 |
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015, White, Config roll
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H