1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920H

  • Pink, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Provides high quality light-medium combination print. The adhesives remove cleanly from the print plate and the print cylinder.
  • Pink foam color indicates the light medium density foam
 More
All Models
Close
Specifications
Brand
Cushion-Mount™
Details
  • Pink, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Provides high quality light-medium combination print. The adhesives remove cleanly from the print plate and the print cylinder.
  • Pink foam color indicates the light medium density foam
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
  • Print plates mounted on E1920H will have no air bubbles under the plate due to the air release feature designed into the tape
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Cushioned flexographic plate mounting sticky back foam tape for flexographic printing

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920H. Our 0.51 mm pink, double coated foam tape has the air release feature with high plate side adhesion. It is used for high speed when process and halftone images predominate.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality with high speed when process and halftone images predominate. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability at demounting.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
Ireland - English