1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315

  • Yellow flexo plate mounting tape provides air release feature
  • 0.38 mm thickness
  • Adhesive removes cleanly from print plate and print cylinder
  • Air release feature with high plate side adhesion used to mount flexographic print plates
 More
Overall Length (Imperial)
Overall_Length_Imperial
Overall Width (Imperial)
Overall_Width_Imperial
Overall Width (Metric)
Overall_Width_Metric
View All Products
 Overall Length (Imperial), Overall Width (Imperial)  Overall Width (Metric)
All Models
Close
Specifications
Air Release
Yes
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Composite Sleeves
Yes
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Medium Soft
Print Quality (Series)
13 Series
Product Form
Roll
Total Tape Thickness without Liner (metric)
0.43 mm
Urethane Sleeves
Yes
Details
  • Yellow flexo plate mounting tape provides air release feature
  • 0.38 mm thickness
  • Adhesive removes cleanly from print plate and print cylinder
  • Air release feature with high plate side adhesion used to mount flexographic print plates
  • Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
  • Print plates mounted on E1315 will have no air bubbles under the plate due to the air release feature designed into the tape
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner.
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Flexographic printing, flexographic printers
  • Cushioned flexographic plate mounting sticky back foam tape

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315. Our 0.38 mm yellow, double coated foam tape has the air release feature with easy plate side removal. It is used for high speed printing of combination work when halftone areas exceed solids.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315 with easy mount adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for high speed printing of combination work when halftone areas exceed solids. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
Ireland - English