1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H

  • Tan flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Adhesive removes cleanly from print plate and print cylinder
  • Provides high-quality process print
 More
Overall Width (Imperial)
Overall_Width_Imperial
Overall Width (Metric)
Overall_Width_Metric
Overall Thickness (Imperial)
Overall_Thickness_Imperial
View All Products
 Overall Width (Imperial), Overall Width (Metric)  Overall Thickness (Imperial)
All Models
Close
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Composite Sleeves
No
Industries
Print
Primary Liner
Polycoated Polyester
Primary Liner Color
Clear
Print Quality
Process Printing
Print Quality (Series)
11 Series
Product Form
Roll
Total Tape Thickness without Liner (metric)
0.56 mm
Units per Case
1
Urethane Sleeves
Yes
Warranty Period
2 Years from Date of Manufacture
Details
  • Tan flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Adhesive removes cleanly from print plate and print cylinder
  • Provides high-quality process print
  • Air release feature with high plate side adhesion used to mount flexographic print plates
  • Print plates mounted on E1120H will have no air bubbles under the plate due to the air release feature designed into the tape
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Flexographic printing, flexographic printers
  • Cushioned flexographic plate mounting sticky back foam tape

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H. Our 0.51 mm tan, double coated foam tape has the air release feature with high plate side adhesion. It is used for high quality process printing.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H with easy mount adhesive and higher plate side adhesive is designed for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
Ireland - English