1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115

  • Tan, flexo plate mounting tape with air release feature adhesive
  • 0.38 mm thickness
  • Provides high quality process print. The adhesives remove cleanly from the print plate and the print cylinder.
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
 More
Overall Width (Metric)
Overall_Width_Metric
View All Products
 Overall Width (Metric)
All Models
Close
Specifications
Air Release
Yes
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Composite Sleeves
No
Primary Liner
Polycoated Polyester
Print Quality
Process Printing
Print Quality (Series)
11 Series
Total Tape Thickness without Liner (metric)
0.43 mm
Urethane Sleeves
Yes
Details
  • Tan, flexo plate mounting tape with air release feature adhesive
  • 0.38 mm thickness
  • Provides high quality process print. The adhesives remove cleanly from the print plate and the print cylinder.
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Print plates mounted on E1115 will have no air bubbles under the plate due to the air release feature designed into the tape
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Plate easily demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Flexographic printing, flexographic printers
  • Cushioned flexographic plate mounting sticky back foam tape

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115. Our 0.38 mm tan, double coated foam tape has the air release feature with easy plate side removal. It is used for high quality process printing.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115 with easy mount adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application while mounting and clean removability when demounting.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
Ireland - English