1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape 1115

  • Tan, flexo plate mounting tape with differential adhesion
  • 0.38 mm thickness
  • Provides high quality process print. The adhesives remove cleanly from the print plate and the print cylinder.
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
 More
Overall Length (Imperial)
Overall_Length_Imperial
Overall Length (Metric)
Overall_Length_Metric
Overall Width (Imperial)
Overall_Width_Imperial
Overall Width (Metric)
Overall_Width_Metric
Product Form
Product_Form
View All Products
 Overall Length (Imperial), Overall Length (Metric), Overall Width (Imperial), Overall Width (Metric)  Product Form
All Models
Close
Specifications
Adhesive Type
Acrylate, Differential Acrylate
Air Release
No
Backing Material
Polyethylene Foam
Brand
Cushion-Mount, Cushion-Mount™
Composite Sleeves
No
Industries
Print
Primary Liner
Polycoated Kraft Paper
Print Quality
Process Printing
Print Quality (Series)
11 Series
Product Form
Roll
Total Tape Thickness without Liner (metric)
0.43 mm
Units per Case
1
Urethane Sleeves
Yes
Warranty Period
2 Years from Date of Manufacture
Details
  • Tan, flexo plate mounting tape with differential adhesion
  • 0.38 mm thickness
  • Provides high quality process print. The adhesives remove cleanly from the print plate and the print cylinder.
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Available in a variety of application methods including die-cut, flatbed and friction fed

3M™ Cushion-Mount™ Plus Plate Mounting Tape 1115 is our 0.38 mm tan, double coated foam tape for mounting photopolimeric plates to print cylinders or sleeves. It provides high quality printing results for process printing.

3M™ Cushion-Mount™ Plus Plate Mounting Tape 1115 is created for mounting flexographic print plates to cylinders or sleeves. Our tape provides high quality tone reproduction where process printing is important. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
Ireland - English