1. All 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape 1020

3M ID 7000115965
  • White, flexo plate mounting tape with differential adhesion
  • 0.51 mm thickness
  • Provides high quality standard combination print. The adhesives remove cleanly from the print plate and the print cylinder.
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
 More
Specifications
Adhesive Type
Acrylate
Air Release
No
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Composite Sleeves
Yes
Primary Liner
Polycoated Kraft Paper
Print Quality
Combination Printing - Standard
Print Quality (Series)
10 Series
Total Tape Thickness without Liner (metric)
0.559 mm
Urethane Sleeves
Yes
Details
  • White, flexo plate mounting tape with differential adhesion
  • 0.51 mm thickness
  • Provides high quality standard combination print. The adhesives remove cleanly from the print plate and the print cylinder.
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Flexographic printing, flexographic printers
  • Cushioned flexographic plate mounting sticky back foam tape

3M™ Cushion-Mount™ Plus Plate Mounting Tape 1020 is our 0.51 mm white, double coated foam tape for mounting photopolimeric plates to print cylinders or sleeves. It provides high quality printing results for combination print.

3M™ Cushion-Mount™ Plus Plate Mounting Tape 1020 is created for mounting flexographic print plates to cylinders or sleeves. Our tape provides high quality standard combination print, and is suitable for combination of solids and tone reproduction where solids and process are equally important. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
Ireland - English